Seaward PrimeTest 200 Instruções de Operação descarregar pdf (Página 15)

PrimeTest 100 Operating Instructions

to the Riso enunciator and the test sequence is

halted.

• If the Insulation Resistance is greater than the

factory set limit a tick is placed next to the Riso

enunciator.

• The unit will proceed with the wiring test,

checking the live and neutral conductors for

short or open circuits or reversed connections.

• If the wiring is correct a tick is placed next to the

cord enunciator, the GOOd enunciator is

illuminated and a PASS is indicated for the

sequence.

Note: If the tested cord has a wiring fault, one of

the following enunciators will be illuminated in

place of GOOd

• OPEn indicates that either the live or

neutral conductor is broken (open circuit)

or the plug top fuse has blown

• Short indicates that the live and neutral

conductors are shorted together

• CrOSS indicates that the live and neutral

connections are crossed (live and neutral

conductors reversed)

3.5 Testing an extension lead

• Visually inspect the mains cord and plug for

signs of damage.

• Check that the correct fuse is fitted.

• If the cord passes a visual inspection proceed

with the electrical tests.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Sem comentários

Seaward PrimeTest 200 Instruções de Operação Página 15